• [AMP-I1] Intermetallic compounds fabrication and Self-propagating high-temperature Synthesis
  - Prof. Reza Ghomashchi (The Univ. of Adelaide)

• [AMP-I2] Multiscale Design and Process-Dependent Microstructural Development of Al Metal Matrix Composites
  - Prof. Yongho Sohn (Univ. of Central Florida)

• [AMP-I3] Anisotropy of selected properties of Si3N4 graphene composite
  - Prof. Lucyna Jaworska (Institute of Advanced Manufacturing Technology)

• [AMP-I4] Wear resistant chromium coatings modified with diamond nanoparticles
  - Dr. Radoslav Valov (Institute of Metal Science)

• [AMP-I5]High-Voltage Compaction of Zirconium Powders
  - Prof. Evgeny Grigoryev (Moscow Engineering Physics Institute)

• [AMP-I6] Fabrication of Metal Foam by Slurry Coating Process
  - Dr. Jung-Yeul Yun (Korea Institute of Materials Science)

• [APM-I1] Effect of SiC Particles on Sinterability of PM Al-Zn-Mg-Cu alloy
  - Dr. Haris Rudianto (Brno Univ. of Technology)

• [APM-I2] Fabrication of Fe-TiC Composites by High-Energy Milling and Spark-Plasma Sintering
  - Prof. JI SOON KIM (Univ. of Ulsan)

• [APM-I3] Effect of Boron and Phosphorous on Sintering Behavior of Fe-Cr-Mo Alloy Steel
  - Dr. Yong-Jin Kim (Korea Institute of Materials Science)

• [ENM-I1] RE-Ba-Cu-O bulk superconductor for energy storage
  - Dr. Chan-Joong Kim (Korea Atomic Energy Research Institute)

• [ENM-I2] Sol-gel synthesis of metal oxide semiconductors with desired properties for photocatalysis and production of biodiesel
  - Dr. Shao Namwel (Hanyang Univ.)

• [ENM-I3] Electrodeposition of semiconductor materials and their applications
  - Dr. Jae-Hong Lim (Korea Institute of Materials Science)

• [MNC-I1] Finite-element analysis of severe plastic deformation in different-speed rolling
  - Prof. Jong-Jin Park (Hongik Univ.)

• [MNC-I2] Calculation of R-value of 1050 Al Alloy Sheet after Two-Step Asymmetric Rolling
  - Prof. INSOO KIM (Kumoh National Institute of Tech.)

• [MNC-I3] Analysis of porosity and sheath effect on isothermal forging of Ni-base Superalloy Powders
  - Dr. EunYoo Yoon (Korea Institute of Materials Science)

• [MNC-I4] Numerical Simulation of Powder Compaction and its Verification
  - Prof. Seong-Jin Park (Pohang Univ. of Science and Technology)

• [MNC-I5] Solidification Mathematical Model of High Performance Stainless Steels for Medical and Skin-Contact Applications
  - Dr. Ileana Popescu (Valahia Univ. of Targoviste)

• [MNC-I6] Characterization and modeling of performance parameters of high-efficiency segmented Bi2Te3/CoSb3 thermocouples
  - Prof. Krzysztof Wojciechowski (AGH Univ. of Science and Technology)

• [NFM-I1] Compositional Optimization of Chalcogenide Glasses for Molded Infrared Optics
  - Prof. Yong Gyu Choi (Korea Aerospace Univ.)

• [NFM-I2] The Relations of Process, Structure, and Mechanical Properties of Novel Aluminum Metal Marix Metallic Composites
  - Prof. Hongjoo Rhee (Mississippi State Univ.)

• [REM-I1] Production and properties of composite material containing Gd multiscale particles
  - Dr. Jacek Andrzej Jaworski (KIST)

• [RMH-I1] Mechanical properties of Mo-Si-B alloys with continuous ¥á-Mo matrix by using core-shell composite powder
  - Prof. Young Do Kim (Hanyang Univ.)

• [RNR-I1] Urban Mining - the Present and Future
  - Dr. KANG IN RHEE (KIGAM)

• [RNR-I2] Strategies for Recycling Critical Materials
  - Dr. Ryan Ott (The Ames Laboratory)

• [RNR-I3] Municipal waste recycling in Poland
  - Dr. Wojciech Hryb (Silesian Technical Univ.)